Are you looking for ways to ensure that a Cleanroom Door opens at least 90 degrees? Many people may have doubts and feel uncertain about how to achieve this. Don’t worry; in this guide, we at LUSEN will lead you through the correct methods.
To ensure that a cleanroom door opens at least 90 degrees, several approaches can be taken:
Adjust Hinge Position:
Inspect the hinges on the door to see if there are adjustment screws. If available, these screws can be used to alter the hinge position, thereby changing the door’s opening angle. After locating the adjustment screws, use an appropriate screwdriver to turn them clockwise or counterclockwise carefully, adjusting the door's opening angle to 90 degrees.
Replace Hinges:
If adjusting the hinge position does not yield the desired result, consider replacing the hinges. Choose hinges of the appropriate size and load-bearing capacity, remove the old hinges, and install the new ones. Ensure the new hinges are securely installed and properly adjusted so that the door can open to 90 degrees.
Adjust Stopper Position:
Some doors are designed with stoppers on the door frame to limit the opening angle. If the stopper position prevents the door from opening to 90 degrees, adjust the stopper’s position or remove it to allow the door to open fully to 90 degrees.
Modify Door Frame Dimensions:
If the door was originally designed in a way that it cannot open to 90 degrees, this might be due to the door frame dimensions not being suitable for the required opening range. In such cases, consider remeasuring and adjusting the door frame dimensions or reinstalling the door frame to ensure the door can open to 90 degrees.
Check Floor Levelness:
Ensure that the floor beneath the door is level. An uneven floor can also prevent the door from fully opening to 90 degrees. Try adjusting the floor level or using shims to solve this issue.
Seek Professional Help:
If none of the above methods work or if you are unable to complete the adjustments yourself, consider seeking professional assistance. Contact a professional door and window installation company or a carpenter who has the necessary experience and tools to help adjust the door’s opening angle to 90 degrees.